Complete Disassembly and Cleaning of the LatteCrema System
~20 min
Medium
Created on August 08, 2025
61 views
Compatible Machines
De'Longhi Magnifica Evo Latte
Related Links
Routine Overview
This is the routine for completely disassembling and cleaning the unique LatteCrema system of the Magnifica EVO.
90% of milk froth quality issues are caused by insufficient cleaning.
Unlike daily quick cleaning, this involves disassembling and thoroughly washing all components.
90% of milk froth quality issues are caused by insufficient cleaning.
Unlike daily quick cleaning, this involves disassembling and thoroughly washing all components.
If not cleaned immediately after milk use, dried milk can make disassembly difficult.
This is an AI-compiled routine. Please share your experiences and suggestions in the comments!
Routine Steps
Progress
%{completed}/%{total} completed (%{percentage}%)
1. Open Milk Container Lid
Turn the lid clockwise until the line aligns with the unlock symbol.
Lift the lid upward to remove.
Lift the lid upward to remove.
If the lid is stiff, slightly lift it first instead of forcing it to turn.
2. Remove Milk Intake Tube
Pull out the transparent milk intake tube.
Check the tube end for milk residue.
Check the tube end for milk residue.
If this tube is blocked, milk won't be drawn up.
3. Remove Milk Dispenser
Position the milk dispenser vertically.
Pull upward to remove.
Pull upward to remove.
If it's stuck, gently twist while pulling.
4. Remove Connector
Press the button on the connector's side.
While holding the button, pull the connector out.
While holding the button, pull the connector out.
This part is often overlooked, but must be removed!
5. Dishwasher Cleaning (Recommended)
Rinse all parts with hot water (above 40°C).
Place in the dishwasher's upper basket.
Wash using 122°F (50°C) ECO program.
Place in the dishwasher's upper basket.
Wash using 122°F (50°C) ECO program.
If no dishwasher is available, proceed to step 6.
6. Manual Cleaning (Alternative)
Rinse all parts with hot water (above 40°C).
Soak in hot water with mild detergent for 30 minutes.
Rinse thoroughly with hot water to remove all detergent.
Soak in hot water with mild detergent for 30 minutes.
Rinse thoroughly with hot water to remove all detergent.
Never use abrasives or metal scrubbers!
7. Check Air Groove
Verify the small groove (air groove) in the connector is clean.
If blocked, carefully clear it with a toothpick.
If blocked, carefully clear it with a toothpick.
If this part is blocked, milk froth won't form properly!
8. Reassemble
Reinsert the connector and press the button to secure.
Insert the milk dispenser vertically.
Push the milk intake tube in fully.
Insert the milk dispenser vertically.
Push the milk intake tube in fully.
9. Close Lid
Place the lid on top (line aligned with unlock symbol).
Turn counterclockwise to the lock symbol.
A click indicates it's fully locked.
Turn counterclockwise to the lock symbol.
A click indicates it's fully locked.
10. Test Operation
Add a small amount of milk and make a cappuccino.
Verify proper milk froth formation and milk flow.
Verify proper milk froth formation and milk flow.
If issues persist, recheck steps 2-7.
Comments (0)
Login is required to write comments.
Login requiredNo comments yet.
Write the first comment!
Related Routine Recommendations
Medium
Medium
Acaia Lunar
Adjusting Acaia Lunar Auto-Reset Time
machine129 · 08/24/2025
by AI
How to optimize the auto-reset time for your working environment. For busy cafes, 10 seconds is recommended, while 30 seconds works better for slower-paced environments. ℹ️ This is an AI-curated routine. Please share your experiences and...
~10m
~10m
#calibration #inspection #as needed
Hard
Hard
Acaia Lunar
Customizing Acaia Lunar Mode List
machine129 · 08/24/2025
by AI
This guide explains how to customize the mode list that appears when holding the power button. You can hide unnecessary modes and set it to cycle through only frequently used modes. 💡 Press '1' on the keyboard to return to mode descriptions. ℹ️...
~15m
~15m
#troubleshooting
Easy
Easy
Gaggia Classic Pro
Backflushing - Group Head Cleaning
machine129 · 07/28/2025
by AI
Remove coffee oils and residue from the group head and 3-way solenoid valve through backflushing. ℹ️ Coffee oils built up in the group head can cause bitter and burnt tastes, while a clogged solenoid valve prevents proper pressure release, making...
3
~10m
~10m
#cleaning #backflush #group head