Delonghi Magnifica S Infuser Monthly Deep Cleaning
~15 min
Medium
Created on August 08, 2025
57 views
Compatible Machines
De'Longhi Magnifica S
Related Links
Routine Overview
This is a routine for completely disassembling and cleaning the infuser, a core component of Delonghi automatic machines.
Unlike other brands, Delonghi allows for complete removal of the infuser,
enabling thorough and hygienic maintenance.
Unlike other brands, Delonghi allows for complete removal of the infuser,
enabling thorough and hygienic maintenance.
Removal is only possible when the power is OFF!
This is an AI-curated routine. Please share your experiences and suggestions in the comments!
Routine Steps
Progress
%{completed}/%{total} completed (%{percentage}%)
1. Machine Shutdown and Preparation
Press the power button to properly shut down the machine.
Wait for the automatic rinse cycle to complete,
then turn the main switch (if present) to the 0 position.
Wait for the automatic rinse cycle to complete,
then turn the main switch (if present) to the 0 position.
The infuser cannot be removed while powered on due to safety mechanisms.
2. Water Tank Removal
Lift and remove the water tank.
Skipping this step may make it difficult to open the infuser door.
Skipping this step may make it difficult to open the infuser door.
3. Open Infuser Door
Pull open the infuser door on the right side of the machine.
If the door feels stuck, don't force it -
verify that the water tank has been completely removed.
If the door feels stuck, don't force it -
verify that the water tank has been completely removed.
4. Remove Infuser
Press both colored release buttons (red or gray)
inward simultaneously while pulling the infuser outward.
inward simultaneously while pulling the infuser outward.
It may be stiff at first, so ensure the buttons are fully pressed while pulling.
If it won't release, try pressing the buttons more deeply.
5. Clean Infuser
Soak the removed infuser in cold water for 5 minutes.
Rinse thoroughly under running cold water, paying special attention to the filter area.
Rinse thoroughly under running cold water, paying special attention to the filter area.
Never use detergent or dishwasher! This will damage the components.
6. Clean Support Base
Remove any coffee residue from where the infuser was housed.
Wipe the support base clean with a damp cloth.
Wipe the support base clean with a damp cloth.
This area is difficult to clean regularly, making monthly cleaning essential.
7. Reinstall Infuser
Align the infuser with the internal support and slide it in,
then push firmly on the 'PUSH' marking until you hear a click.
then push firmly on the 'PUSH' marking until you hear a click.
If it doesn't fit easily, adjust the two levers at the bottom of the infuser to match the size.
8. Final Check
Verify that both colored buttons have popped outward.
Close the infuser door and reinstall the water tank.
Power on the machine and test for normal operation.
Close the infuser door and reinstall the water tank.
Power on the machine and test for normal operation.
Comments (0)
Login is required to write comments.
Login requiredNo comments yet.
Write the first comment!
Related Routine Recommendations
Medium
Medium
Acaia Lunar
Adjusting Acaia Lunar Auto-Reset Time
machine129 · 08/24/2025
by AI
How to optimize the auto-reset time for your working environment. For busy cafes, 10 seconds is recommended, while 30 seconds works better for slower-paced environments. ℹ️ This is an AI-curated routine. Please share your experiences and...
~10m
~10m
#calibration #inspection #as needed
Hard
Hard
Acaia Lunar
Customizing Acaia Lunar Mode List
machine129 · 08/24/2025
by AI
This guide explains how to customize the mode list that appears when holding the power button. You can hide unnecessary modes and set it to cycle through only frequently used modes. 💡 Press '1' on the keyboard to return to mode descriptions. ℹ️...
~15m
~15m
#troubleshooting
Easy
Easy
Gaggia Classic Pro
Backflushing - Group Head Cleaning
machine129 · 07/28/2025
by AI
Remove coffee oils and residue from the group head and 3-way solenoid valve through backflushing. ℹ️ Coffee oils built up in the group head can cause bitter and burnt tastes, while a clogged solenoid valve prevents proper pressure release, making...
3
~10m
~10m
#cleaning #backflush #group head